Official BIOS release CQ for BD7II/BD7II-RAID

Release information:

[ENGLISH]

1. Fills MAC Address into UUID section in DMI data to pass WHQL.
2. Change the definition of UUID in DMI data- move the MAC address from top 
   to bottom of the string.
3. Fix issue where if the “Shutdown When CPU FAN Fail” option fails after 
   about 16 minutes idling under Windows 2000/XP.
4. Fix the compatibility issue that ATI Radeon 9700 Pro failed to boot up 
   with certain power supply unit - TC-350P. With this power supply, 9700 
   Pro will failed to boot up and need to push reset button once to show 
   the screen.
5. Show "Hyper-Threading" wording on POST screen when Hyper-Threading CPU 
   installed.
6. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only.This 
   BIOS version is also for non RAID boards and HPT BIOS will be 
   automatically disabled while RAID controller chip not detected.
7. BIOS Compile Date: 11/28/2002.


-----------------------------------------------------------------------------
                 Official BIOS release  BU for BD7II/BD7II-RAID

Release information:

[ENGLISH]

1. Fill in new CPU micro code (0F27). 
2. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. 
   This BIOS version is also for non RAID boards and HPT BIOS will be 
   automatically disabled while RAID controller chip not detected. 
3.BIOS compile Date: 9/17/2002.


[TRADITIONAL CHINESE]

1. 填入新的 CPU micro code (0F27)。 
2. HPT 372 BIOS 版本 2.32。適用於 BD7II-RAID。本 BIOS 同時適用於非 RAID之 
   主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動 disable 
   HPT BIOS。 
3. BIOS 日期: 9/17/2002。




*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "bd72bu.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.