BIOS release DU for TH7II / TH7II-RAID v1.0
                                    

Release information:

[ENGLISH]

1. The default year sets up to 2003.
2. Update HPT370 BIOS version v2.34 to support hard drive larger than 
   136GB. The RAID function is for TH7II-RAID only. This BIOS version is 
   also for non RAID boards and HPT BIOS will be automatically disabled 
   while RAID controller chip not detected.
3. BIOS Compile Date: 4/11/2003


------------------------------------------------------------------------------
      Official BIOS release BW for TH7II/TH7II-RAID

Release information:

[Èesky]
1. pøidaná podpora microcode pro novìjší typy CPU (0f0a/12, 0f12/2c, 0f13/04, 0f27/27, 0f24/0f) 
2. zvýšen multiplikátor v SoftMenu až na 24x 
3. výchozí rok po resetu CMOS je nyní 2002



[ENGLISH]

1. Add CPU micro code 0f0a/12, 0f12/2c, 0f13/04, 0f27/27, 0f24/0f.
2. Provide CPU multiplier up to 24X in SoftMenu.
3. Default date of year setup to 2002.
4. BIOS Compile Date: 11/07/2002.



------------------------------------------------------------------------------

                   Official BIOS release  BF for TH7II/TH7II-RAID v1.0

Release information:

[ENGLISH]

1. Support Intel P4 Celeron 2.0G CPU.
2. Support PMC Pm49FL004T 4Mb Flash ROM.
3. HPT 37x BIOS Version 2.0.1024. The RAID function is for TH7II-RAID only.
   This BIOS version is also for non RAID boards and HPT BIOS will be 
   automatically disabled while RAID controller chip not detected.
4. BIOS compile Date: 9/13/2002.



[TRADITIONAL CHINESE]

1. ¤ä´© Intel P4 Celeron 2.0G CPU¡C
2. ¤ä´© MC Pm49F004T 4Mb Flash ROM¡C
3. HPT 37x BIOS version: 2.0.1024¡C¾A¥Î©ó TH7II-RAID¡C¥» BIOS ¦P®É¾A¥Î©ó
   «D RAID ¤§¥D¾÷ªO¤W¡C·í BIOS °»´ú¨ì±z¨Ï¥Îªº¥D¾÷ªO¤£§t RAID ®É±N·|¦Û°Ê 
   disable HPT BIOS¡C
4. BIOS ¤é´Á: 9/13/2002¡C




*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "th7hbf.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.